FLOWEXPERT Diaphragm Pump KDP-170
FLOWEXPERT High Pressure DC/AC Electric Diaphragm Pump KDP-170 5.5LPM 170PSI for Misting Machine, Pressure washer, Agriculture Electric Sprayer
The rotary diaphragm water pump is compact and easy to install. This is a high quality electric diaphragm pump,low power consumption, super hydrostatic bring extreme atomization enjoyment,Widely used in general industry equipment, medical equipment, chemical equipment, farming (lawn and garden), tour vehicles, special vehicle, ship, beverage, vehicle cleaning, carpet cleaning, ground cleaning, water purification and water treatment equipment.
FEATURES
- Constructed from a selection of materials suitable for handling a broad range of applications
- Sealed pressure switch and motor
- Self-priming up to 8 feet (2.3 m)
- Can be located above supply tank
- Can run dry for extended periods without damage
- Maximum torque and operating efficiency
- Higher operating pressure and/or lower amperage than competitive pumps Long life, no leaks
- Low noise; acid, alkali and corrosion resistant
- Run dry with no problem
FUNCTIONS
- PUMP Design: 3 chamber diaphragm
- Motor Design: 12, 24 VDC; 110, 115, 120, 220, 230VAC
- Pump Head: Glass filled Nylon
- Elastomers: Diaphragm - Santoprene; Check Valves - EPDM or Viton
- Max. Flow rate: 5.5lpm (1.5gpm), can be adjusted from 1.0-5.5lpm (0.3-1.5gpm) as required.
- Max Pressure: 170psi (11.9bar) switch cutoff, can be adjusted from 10psi (0.6bar) to 170psi(11.9bar) as required.
- Fluid Temperature: 40°F(5°C) Min.; 140°F(60°C) Max.
- Inlet/Outlet fitting:10mm pyramid connector, 3/8" hose barb and thread fitting, etc for your choice.
- Protection: pressure switch protection: pressure-off protection or circumfluence switch protection. For the powered control you can choose pump without pressure protection.
- Duty Cycle: Intermittent (under different pressure the continuous working time will also be different).
- Weight: 7.6 lbs (3.5kg) Max
- Certifications: CE, RoHS, NSF components.
- Wiring options: Standard 14 AWG leads
- Port Size Inlet/Outlet: 3/8" NPTF
STANDARD PUMP CONFIGURATIONS
| Model | Volts | Open Flow (LPM/GPM) |
Cutoff Pressure (Psi/Bar) |
Rated-load Amps (A) |
Max Amps Draw(A) |
Suction (m) |
In/Outlet Port |
Hosing Connectors |
|
KDP-60A |
12V DC |
4.6/1.2 |
60/4.2 |
4.0 |
5.0 |
2 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-80A |
12V DC |
5.3/1.4 |
80/5.6 |
4.5 |
6.0 |
2 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-100A |
12V DC |
5.5/1.5 |
100/6.9 |
5.0 |
7.0 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-120A |
12V DC |
5.5/1.5 |
120/8.3 |
5.2 |
8.0 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-130A |
12V DC |
5.5/1.5 |
130/9.0 |
5.3 |
8.5 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-160A |
12V DC |
5.5/1.5 |
160/11.0 |
5.5 |
10.0 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-170A |
12V DC |
5.5/1.5 |
170/11.7 |
5.6 |
10.5 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-60B |
24V DC |
4.6/1.2 |
60/4.2 |
2.5 |
3.0 |
2 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-80B |
24V DC |
5.3/1.4 |
80/5.6 |
2.8 |
3.5 |
2 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-100B |
24V DC |
5.5/1.5 |
100/6.9 |
3.0 |
4.0 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-120B |
24V DC |
5.5/1.5 |
120/8.3 |
3.2 |
4.5 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-130B |
24V DC |
5.5/1.5 |
130/9.0 |
3.3 |
4.8 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-160B |
24V DC |
5.5/1.5 |
160/11.0 |
3.5 |
5.3 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-170B |
24V DC |
5.5/1.5 |
170/11.7 |
3.6 |
5.5 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-120S |
220~240V AC |
5.5/1.5 |
120/8.3 |
0.32 |
0.45 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-130S |
220~240V AC |
5.5/1.5 |
130/9.0 |
0.33 |
0.48 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-160M |
110~120V AC |
5.5/1.5 |
160/11.0 |
0.55 |
1.0 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-160S |
220~240V AC |
5.5/1.5 |
160/11.0 |
0.35 |
0.53 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-170M |
110~120V AC |
5.5/1.5 |
170/11.7 |
0.56 |
1.05 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
|
KDP-170S |
220~240V AC |
5.5/1.5 |
170/11.7 |
0.36 |
0.55 |
2.3 |
3/8" NPTF |
G3/8"+Φ10mm OD Barb |
FLOW-PRESSURE DRAWINGS
KDP-170
Dimension Drawings
